A drawer for CR-6 SE that fits neatly into space under the monitor unit.
3 parts:
Drawer Box(short, tall)
Outer Box that slide into v-slot type frame (short, tall)
Top Board
-Take off two screws that hold the monitor unit, slide the outer box into grooves.
-Top board is optional, super glue it on top of the outer box if needed.
If you want more height, take it off. Please be careful not to harm the cable and vent under the monitor when you use it this way.
-Two sizes: Short size has 10mm tolerance underneath. Tall size touches the table (with stock CR-6 height) and the box is 10mm deeper.
[UPDATES]
-Added a spacer for SHORT size drawer to fit in TALL size outer box.
Just drop it in underneath the drawer box.
Also you can flip it the other way and use the space for storing your screen cover. https://www.thingiverse.com/thing:4618914
(10/25/2020)
-Added a separator.(10/26/2020)
-Added Drawer box variant with a handle similar to stock CR-6 drawer. (11/2/2020)
| CR-6_SE_One_More_Drawer_Short.stl | 630.6KB | |
| CR-6_SE_One_More_Drawer_Tall.stl | 642.0KB | |
| Drawer_BoxShort.stl | 620.2KB | |
| Drawer_BoxShort_with_Creality_Style_handle.stl | 498.5KB | |
| Drawer_BoxTall.stl | 631.6KB | |
| Drawer_BoxTall_with_Creality_Style_handle.stl | 584.3KB | |
| Outer_BoxShort.stl | 9.8KB | |
| Outer_BoxTall.stl | 9.8KB | |
| Separator.stl | 2.2KB | |
| Spacer.stl | 1.1MB | |
| Top_Board_for_Outer_Box.stl | 684.0B |
![[K] Aide Maintien Crayon (Pen Holder) 3D Printer Model](https://res.3axis.co/1cf12f82-2b45-401f-89bb-1db6a049060f/images/5efae9d8-6708-43c1-8d60-4c32f1474846_thumb.jpg)
