Specs :
1/4"(6.35mm) Hex compatible
Description :
Need to extend the length of your screwdriver bit holder or handle,
this is for you
This handle is compatible with any Hex 1/4" (6.35mm) tool bits.
This is just an extension. If you need some tool bits or handles,
visit : http://www.thingiverse.com/thing:1381028
Comes in 5 different sizes :
20mm (very short)
40mm (short)
60mm (basic)
80mm (long)
100mm (very long)
Tips and tricks :
It's easier to fix a bit too loose than too tight. For that, just put a tiny bit of Blu-Tack down the socket (the female part) and you should be good for hundreds of uses before having to change it.
| OMT²_-_Extensions_All_Sizes.stl | 187.2KB | |
| OMT²_-_Extensions_SKP.zip | 819.4KB | |
| OMT²_-_Long_Extension_80mm.stl | 37.0KB | |
| OMT²_-_Normal_Extension_60mm.stl | 37.0KB | |
| OMT²_-_Short_Extension_40mm.stl | 37.0KB | |
| OMT²_-_Very_Long_Extension_100mm.stl | 36.9KB | |
| OMT²_-_Very_Short_Extension_20mm.stl | 36.9KB |
