Specs :
1/4"(6.35mm) Hex compatible
Length of the Allen key bit : 20mm
Description :
Set of the 6 most commonly used Allen keys (in mm, the imperial version is available : http://www.thingiverse.com/thing:1381003)
Compatible with any standard bit holder and/or OMT² handles.
Update : If you have troubles slicing the files with ReplicatorG, there is now a version without the superscript 2 (called OMT2...)
This is just a tool head. If you need a handle or other tools for your bit holder,
visit : http://www.thingiverse.com/thing:1381028
This set has been made following the ISO 4762/DIN 912 standards.
NO TOLERANCE HAS BEEN APPLIED
Depending on your printer precision, it may be a very tight fit. Some extra cleaning work may be needed on the Allen end bit.
This will never fully replace a set of metal Allen keys, but that can come in handy sometimes ;)
Sizes :
M3 (2.5mm)
M4 (3mm)
M5 (4mm)
M6 (5mm)
M8 (6mm)
M10 (8mm)
This set comes in 3 flavours :
To know which one to pick, simply print this quick test :
| OMT2_-_Allen_Keys_M3-M10.zip | 557.4KB | |
| OMT²_-_Basic_-_Allen_Keys_Set_-_M3_to_M10.stl | 1.9MB | |
| OMT²_-_Basic_-_Allen_Keys_SKP.zip | 1.2MB | |
| OMT²_-_Basic_-_Allen_Key_M10.stl | 345.4KB | |
| OMT²_-_Basic_-_Allen_Key_M3.stl | 362.0KB | |
| OMT²_-_Basic_-_Allen_Key_M4.stl | 242.4KB | |
| OMT²_-_Basic_-_Allen_Key_M5.stl | 315.9KB | |
| OMT²_-_Basic_-_Allen_Key_M6.stl | 336.7KB | |
| OMT²_-_Basic_-_Allen_Key_M8.stl | 341.0KB | |
| OMT²_-_Loose_-_Allen_Keys.zip | 1.6MB | |
| OMT²_-_Tight_-_Allen_Keys.zip | 1.6MB |
