OLED-Case SH1106 1.3″ + Rotary Encoder (Gaggia Classic Mod) 3D Printer Model
The file 'OLED-Case SH1106 1.3″ + Rotary Encoder (Gaggia Classic Mod) 3D Printer Model' is (stl) file type, size is 1.4MB.
The file 'OLED-Case SH1106 1.3″ + Rotary Encoder (Gaggia Classic Mod) 3D Printer Model' is (stl) file type, size is 1.4MB.
Remix of cochonez OLED-Case for 1.3" SH1106 Display for mounting a rotary encoder behind the display.
I used it for the CleverCoffee Mod (https://clevercoffee.de/) on my Gaggia Classic, so I also made a knew lid for the water tank and a tiny cover to hide the cables.
Rotary encoder must be slightly modified to fit into the case:
Cut the shaft direct at the beginning of the D-Form to fit a small knob, remove the pins and solder cables at the back of the encoder.
VCC and GND of display and encoder can be connected to reduce cables.
Knob should be pressed slightly on the shaft to fit without glue.
Used some 10x2mm neodym magnets to attach the oled case to the watertank lid.
Printed without support.
Many thx to the guys from CleverCoffee for their great project and patient support!
Display:
https://de.aliexpress.com/item/1005006127524245.html
Rotary encoder:
https://amzn.eu/d/aUiC5cq
| cable_cover.stl | 21.0KB | |
| case_body.stl | 242.5KB | |
| gaggia_lid_left.stl | 15.7KB | |
| gaggia_lid_right.stl | 24.5KB | |
| oled_knob.stl | 203.2KB | |
| oled_lid.stl | 3.3MB |
