Old Stone Building Hueforge 3D Printer Model
The file 'Old Stone Building Hueforge 3D Printer Model' is (3mf,stl) file type, size is 26.1MB.
The file 'Old Stone Building Hueforge 3D Printer Model' is (3mf,stl) file type, size is 26.1MB.
This is a Hueforge I created from a Photo I tool of an Old Stone Building in Minneopa State Park in Minnesota.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 199.99x112.34mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Overture Red Transmission Distance: 4.8
PLA Overture Light Yellow Transmission Distance: 3.1
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #11 (0.96mm) swap to Light Yellow
At layer #12 (1.04mm) swap to White for the rest.
| Stone_Building_Minneopa_State_Park_200x112.3mf | 12.2MB | |
| Stone_Building_Minneopa_State_Park_200x112_STL.stl | 54.0MB |
