The file 'Old Logan Wolverine In Part For Scaling 3D Printer Model' is (stl,data,gcode) file type, size is 126.4MB.
https://www.facebook.com/TOSHIRTcom/
cut with ideamaker to be able to print at 350% (and cut the base, only feet)
Cr10, PLA white 0.15 and 15% fill
work on original file :
https://www.myminifactory.com/object/3d-print-old-man-logan-45708
by cutting and scaling it by 350%
1.1kg of PLA
80h total printing time
Creality Cr10
Thanks a lot to Exequiel Devoto
FB: https://www.facebook.com/ExequielDevoto/
Insta: https://www.instagram.com/exequieldevoto_3d/
| bras_part7.stl | 3.9MB | |
| bras_part8.stl | 2.2MB | |
| jambe_corps_part4.stl | 15.4MB | |
| jambe_corps_part5.stl | 15.1MB | |
| jambe_corps_part6.stl | 6.4MB | |
| jambe_part2.stl | 7.5MB | |
| jambe_part3.stl | 6.6MB | |
| main_part10.stl | 2.0MB | |
| main_part9.stl | 2.4MB | |
| omlbased-1-export.stl | 77.3MB | |
| socle_part1.stl | 11.8MB | |
| socle_pieddroit.stl | 2.8MB | |
| socle_piedgauche.stl | 2.8MB | |
| socle_pieds.data | 118.2KB | |
| socle_pieds.gcode | 8.7MB | |
| socle_piedsD.gcode | 6.3MB | |
| socle_piedsG.gcode | 7.8MB | |
| tete_part11.stl | 6.1MB |
![PlaKit’s Mobile Charms Series 3 [UPDATED] 3D Printer Model](https://res.3axis.co/6084c470-284f-431a-b9fe-78f9ca1f532c/images/16791f92-7905-42b8-ba62-71b466c5edcf_thumb.jpg)
![Marvel Classics Wolverine Double Pack! 90s & Retro [UPDATED] 3D Printer Model](https://res.3axis.co/35c20ff8-8bf0-41f5-bc5f-c02d9f5f1888/images/7bbc9995-5e7e-48bc-9617-7c81405d52fc_thumb.jpg)
