Tools for opening Öhlins TTX1-2 Air shock. I used 3x20mm steel pins from Aliexpress, but you could also use e.g. drill bits.
The tools are very snug fit, you might need to scale the model depending on your printer. Print with thick walls and high infill, 0,2mm layer height. Press the LSC tool with thumb while turning! I used Polymaker PLA, successfully opened two shocks without the tools breaking. Be careful and use common sense.
Check my other models if you need the 8mm shaft clamp.
You really should have a vacuum bleeder for these twin-tube shocks!
| damper-tool.STL | 81.5KB | |
| LSC-tool.STL | 100.2KB |
