Oculus Touch – Gun Stock Streamlined 3D Printer Model
The file 'Oculus Touch – Gun Stock Streamlined 3D Printer Model' is (stl) file type, size is 3.5MB.
The file 'Oculus Touch – Gun Stock Streamlined 3D Printer Model' is (stl) file type, size is 3.5MB.
This is a streamlined remix of the Oculus gun stock by Gurgelx. It has been adjusted to be Easier to handle, use less filament and be put together entirely without extra hardware or glue. All parts ave been friction welded together and cleaned up in post processing. I have even made pins which can be printed to allow the rail mounts to be adjusted. i have also included an optional, shorter stock.
The reinforcement brackets are designed to slide onto the bottom rail and, well, reinforce the joints. These are however optional.
You need to print
2 x Rail Body.stl (rails)
1 x Rail End.stl (end of rail)
2 x touch rail adapter (rail mounts)
1 x Stock clip (stock mount)
1 x touch-stock-mk2.stl or MK2
1 x touch-mount-left-mk3.stl
1 x touch-mount-right-mk3.stl
2 x pin.stl
construction is self explanatory., But message or comment for help.
| CV1_grip-left-mk3.stl | 5.7MB | |
| cv1_grip-right-mk3.stl | 5.1MB | |
| pin.stl | 43.0KB | |
| Rail_body.stl | 196.7KB | |
| Rail_End.stl | 187.8KB | |
| Reinforcement_bracket.stl | 96.7KB | |
| Stock_Clip.stl | 133.5KB | |
| touch-mount-left-mk3.stl | 5.0MB | |
| touch-mount-right-mk3.stl | 5.0MB | |
| touch-stock-mk2.stl | 254.8KB | |
| Touch_Rail_adapter.stl | 166.5KB | |
| Touch_Stock_MK3.stl | 1.5MB |
