I couldn't find an Oculus Rift S/Quest controller wall mount I liked, so I made one.
https://www.thingiverse.com/thing:3617687 is nice, but I hated that the wrist strap needs to be threaded through each time.
Gravity held, and to release simply tilt up.
Supports are needed, and I suggest you add a few more. Will easily fit on a standard 200mm bed if printed diagonally.
2x 5mm bolts or screws are needed.
I used a black permanent marker to colour in the logo
Full set
https://www.thingiverse.com/thing:3678066 - Oculus Rift S, Quest, CV1 Wall Mount
https://www.thingiverse.com/thing:3678073 - Oculus Rift S or Quest Controller Wall Mount
https://www.thingiverse.com/thing:3678079 - Oculus Cable Wall Mount (or headphones)
2x 5mm bolts or screws are needed.
EDIT: Added a single controller mount for those with smaller print beds, and additionally screwhole-less versions if you want to use some double sided tape instead.
| Rift_S_Controller_Wall_Mount.stl | 2.9MB | |
| Rift_S_Controller_Wall_Mount_Single.stl | 1.6MB | |
| Rift_S_Controller_Wall_Mount_Single_Stick.stl | 1.9MB | |
| Rift_S_Controller_Wall_Mount_Stick.stl | 2.8MB |
