Print follow the number if you want
1_fondo
2_crocedisco2
3_crocedisco1
4_filetto
5_testa
6_bottone
I raccomend brim for every piece
Support is necessary only for 'crocedisco1': rotate it 180 degrees with the thread facing the print plate. Even the 5_testa piece may be needed depending on your printer.
0.2 resolution is almost good
After print you must use glue (like attack) for attach 'crocedisco1 & crocedisco2'.
the remaining parts are screwed
| 1_fondo.stl | 2.6MB | |
| 2_crocedisco2.stl | 2.3MB | |
| 3_crocedisco1.stl | 2.7MB | |
| 4_filetto.stl | 3.0MB | |
| 5_testa.stl | 5.1MB | |
| 6_bottone.stl | 334.8KB |
