I couldn't find a wall mount for my VR headset Oculus quest 2 that I liked - so I made one to suit my needs.
Please do look through all the images, they're arranged in order of operation/installation. You'll also notice that I black sharpied the inside of the recess to complete the look.
The logo on the outside is the oculus logo and I thought it would make a handy place to mount the mount from. Get yourself a screw and go right through the center to mount it to the wall. Use a level along the bottom whilst screwing to make sure it stays level whilst you're applying pressure to the screw. Be careful applying pressure when the mount gets tighter against the wall incase of the screw hole cracking. I didn't really fear it but it could be over done, use a screwdriver rather than a drill for this part.
Finally, when you're happy with the position of the mount put in the little cap to complete the look. This will require a little force, not a lot, but be warned, as it's a friction fit it's quite hard to extract this cap out after it's been pushed all the way in.
| quest_2_wall_mount_v5.stl | 175.0KB |
