Magnetic Grips for Quest 2

Hi everyone!

First of all I'd like to thank joaoluisbrito for creating such a intricate and functional stock. I'm a fan of the VRGM stock and love how it feels in the hands however, I've noticed a lack of Quest 2 compatibility.

So, after a few weeks of trial and error, I've finally decided to upload these here.

These magnetic grips are designed to be used with the 2 x 20 by 3 mm magnets, as I've not had luck with the 4 x 10mm magnets.

There's a cut out for wrist/knuckle straps on each controller as well. Not only do these help with holding the controllers, these also act as a safe guard for the controllers as they prevent the printed grips from slipping away. Just so you're aware - the opening is around 22mm wide, so double check if your straps will fit.

Another feature is that these have triangular raisers - these prevent the grips from rotating which causes the magnets to separate. I've read this in a few comments and had the magnets separate for me as well - causing the stock to fall.

I hope you enjoy printing and using these! I've tried to make them as easy to print (the versions before weren't so successful!)

As this is my first file on thingiverse, let me know if there's any feedback!

If you have questions, leave these in the comments below. Cheers!

If you enjoyed using this grip and would like to support me, buy me a coffee! Any tips are appreciated!