Octopus Stand Version Three 3D Printer Model
The file 'Octopus Stand Version Three 3D Printer Model' is (stl) file type, size is 1.0MB.
The file 'Octopus Stand Version Three 3D Printer Model' is (stl) file type, size is 1.0MB.
Version three of the Octopus tablet stand. This one was designed to fit the iPhone 6/6 Plus, iPad Air and a slew of Android devices. There should be just enough room for a case with most devices. I recommend adding a little bit of sticky adhesive to the bottom to keep it nice and secure.
I've uploaded a slightly earlier version of the design. It has bit tighter of an opening and slightly more height to it if you find your device is wobbly.
Note: the Moto X 2014 is pretty wobbly in it and I would not recommend it at this time.
I've printed a copy of this out at Shapeways myself, as I am absent a 3D Printer :( You can find it here if you're in the same boat as I.
http://shpws.me/wIBN
| OcotoArm-v3-Final-11mmCase.stl | 1.1MB | |
| OcotoArm-v3-Old-Tighter.stl | 1.1MB |
