3D printed Logo design of the NZXT Logo with integrated USB ports.
The Logo itself is made out of one Bottom/Back piece and four Diffusor pieces. The Stand is made of one 3d Printed piece and an aluminium plate, but you can also 3d print it. The stand itself can be raised a few millimeters with small feet or some M3 standoffs.
The Plate is mounted with M3 flathead screws and M3 Heat Inserts.
I sanded the black pieces smooth and painted them to have a finish.
I used one USB as an Input and three as Outputs. Inside theres a 4x USB splitter, one conncets to the Arduino Micro, which can be controlled via Corsair ICUE software.
For extra Charging power I added a 5,5mm socket for 5v Power supply.
WS2812B led Stripes behind the diffusors and one 144led/m facing towards the bottom.
| NZXT_Logo_-_Diffusor_N.stl | 3.8KB | |
| NZXT_Logo_-_Diffusor_T.stl | 3.0KB | |
| NZXT_Logo_-_Diffusor_X.stl | 79.4KB | |
| NZXT_Logo_-_Diffusor_Z.stl | 4.6KB | |
| NZXT_Logo_-_Foot_4x.stl | 99.0KB | |
| NZXT_Logo_-_LED_Bottom.stl | 101.0KB | |
| NZXT_Logo_-_metal_Plate.stl | 94.0KB | |
| NZXT_logo_-_Stand.stl | 230.6KB |
