Numberz - An analog-digital, weight driven, mechanical clock.
The idea is to tell the time via the three viewing windows for the hours, minutes, and seconds (an led backlight would be ideal).
This clock tells every hour, every ten minutes, and every five seconds. To set the time, rotate the number dials over the gears.
I used the "Seven Segment Digits in OpenScad" code by WilliamAAdams.
Special thanks to hair_raisin for his help with the OpenSCAD code as well!
| numberz_bob.stl | 13.2KB | |
| numberz_frame-bottom-left.stl | 51.5KB | |
| numberz_frame-bottom-pivot.stl | 18.7KB | |
| numberz_frame-bottom-right.stl | 109.8KB | |
| numberz_frame-top-left.stl | 46.4KB | |
| numberz_frame-top-right.stl | 25.6KB | |
| numberz_hours-gear.stl | 852.8KB | |
| numberz_hours.stl | 97.1KB | |
| numberz_middle-arm-bottom.stl | 107.5KB | |
| numberz_middle-arm-top.stl | 7.3KB | |
| numberz_minutes-gear.stl | 835.2KB | |
| numberz_minutes-pinion.stl | 338.1KB | |
| numberz_minutes-spacer.stl | 12.6KB | |
| numberz_minutes.stl | 184.5KB | |
| numberz_pallet.stl | 61.4KB | |
| numberz_seconds-escapement.stl | 126.5KB | |
| numberz_seconds-pinion.stl | 227.4KB | |
| numberz_seconds-spacer.stl | 12.6KB | |
| numberz_seconds.stl | 340.6KB | |
| numberz_spacer.stl | 12.6KB | |
| numberz_third-gear.stl | 870.7KB | |
| numberz_third-pinion.stl | 261.2KB | |
| SegmentedNumber.scad | 7.1KB |
