“Nukulele” Playable Soprano Ukulele, Sounds Great Printable Without Supports. 3D Printer Model
The file '“Nukulele” Playable Soprano Ukulele, Sounds Great Printable Without Supports. 3D Printer Model' is (stl) file type, size is 991.04 KB.
The file '“Nukulele” Playable Soprano Ukulele, Sounds Great Printable Without Supports. 3D Printer Model' is (stl) file type, size is 991.04 KB.
I designed this Ukulele after printing a few of the other Ukes on Thingiverse that were good but still had room for improvement.
Improvements include:
No buzzing
No sharp corners
Doesn't get out of tune on the higher frets.
2 halves fit together properly
machines fit great.
The 2 parts fit together snugly for me there was no need for glue but depending on your printer/slicer you may need to.
You will need 4 Uke machine heads just google B00EQ29KNG and you'll find the ones I used. I bought some machine heads that were too long so I made a spacer block you can add to the back so everything will still work properly.
also you will need 4 Ukelele strings.
You will need a print area at least 10.5" tall.
If you want to print this on a smaller printer let me know what size you have and I can try to split it up for you so you can glue the parts together.
I've improved everything I could think of but if you feel like there is something that could be better please let me know!
All feedback is welcome.
02/21/2015 - Added new files with neck and body cut in half for a smaller height requirement (now 5.35" or 136 mm tall) I haven't tried gluing these halves together so let me know how that works for you.
02/28/2015 - Added a spacer that you can add to the back of the head if your tuners are too long.
| Body.stl |
| Body_Lower.STL |
| Body_Upper.STL |
| JOINER.STL |
| Neck.STL |
| NeckSpacer.STL |
| Neck_Lower.STL |
| Neck_Upper.STL |
