Nuka Cola Lamp 3D Printer Model
The file 'Nuka Cola Lamp 3D Printer Model' is (stl) file type, size is 191.5KB.
The file 'Nuka Cola Lamp 3D Printer Model' is (stl) file type, size is 191.5KB.
This is a nightlight based on the Fallout 3 Nuka Cola Lamp. The cola bottle is a remix of ShaAli, Coke Bottle http://www.thingiverse.com/thing:26234. I made it larger, filled in the base, and added a few holes for wires and mounting. I designed it to run off a 5v USB cable, as well as added mounts for uses with devlab 2 AAA Battery Holder http://www.thingiverse.com/thing:35515. I've added options for either three 3mm LEDs, or one 5mm. The design also leaves room for customization of the LED mounts. https://tinkercad.com/things/dMad5jc671c
I used an oversized switch because I liked the look, and I had it on hand at the time. I added a diffuser, because I wanted it more as a nightlight then reading lamp. All parts fit snug together. I used 4 #4 screws on the base to hold the bottle in place. The label was created by Whatpayne http://whatpayne.deviantart.com/art/Nuka-Cola-old-school-batch-pt1-118806693 I reduced the size by 50%.
This thing was made with Tinkercad.
Edit it online: #Fallout
https://tinkercad.com/things/7n0HN4Ts5SC
https://tinkercad.com/things/dMad5jc671c - Plugs
| nuka_lamp_base_lower.stl | 22.2KB | |
| nuka_lamp_base_upper.stl | 34.1KB | |
| nuka_lamp_bottle.stl | 259.6KB | |
| nuka_lamp_diffuser.stl | 42.7KB | |
| nuka_lamp_plug.stl | 18.1KB | |
| nuka_lamp_plug_5mm.stl | 18.1KB | |
| nuka_lamp_plug_three_3mm_leds.stl | 27.0KB | |
| nuka_lamp_shade.stl | 49.5KB | |
| nuka_lamp_shade_striped_red.stl | 88.6KB | |
| nuka_lamp_shade_striped_white.stl | 133.9KB |
