Nuebaufahrzueg – 1/200 – With Snap In Turrets 3D Printer Model
The file 'Nuebaufahrzueg – 1/200 – With Snap In Turrets 3D Printer Model' is (stl) file type, size is 1.7MB.
The file 'Nuebaufahrzueg – 1/200 – With Snap In Turrets 3D Printer Model' is (stl) file type, size is 1.7MB.
These are 1/200 models of a Nuebaufahrzueg.
What were the Nuebaufahrzueg? These were a pre WWII German, multi turreted tanks. They were used in the invasion of Norway and for propaganda purposes.
These models have snap in turrets, i.e. after printing and cleanup just slowly push in the turret into the hull. It will snap in place and won't fall out. On a resin printer the hull will print fair at 1/285, just be careful about removing supports on the rear tracks. I haven't tried the turrets yet. That would be the correct scale for Advanced Squad Leader deluxe map.
I recommend you print the mg turret models labeled simple. The guns are beefed up so they are easier to print and don't break off once you do. If you have trouble printing the hull, removing the supports on the back of the tracks or want to print these models at 1/285, I strongly suggest you print the simple hull. The suspension is beefed up on this.
These are a remix of tigerace1945's most excellent work, found in his Boneyard Pack. I rescaled, reoriented, beefed up and added the snap turret to his design.
3/3/2024 - Added simple hull model. Added true Ausf A turret.
| Neubaufahrzeug_-_Hull.stl | 1.8MB | |
| Neubaufahrzeug_-_Hull_-_Simple.stl | 2.2MB | |
| neubaufahrzeug_-_mg_turrent_Ausf_A.stl | 100.1KB | |
| Neubaufahrzeug_-_mg_turrent_Ausf_B_type1.stl | 90.1KB | |
| neubaufahrzeug_-_simple_mg_turrent_Ausf_A.stl | 107.5KB | |
| Neubaufahrzeug_-_simple_mg_turrent_Ausf_B_type1.stl | 98.1KB | |
| Neubaufahrzeug_-_Turrent_Ausf_A.stl | 354.9KB | |
| Neubaufahrzeug_-_Turrent_Ausf_B.stl | 402.3KB |
