Modifications
I have modified the holder and some of the code.
My design holds up to 2 watches and has a movable DCF77 transmitter antenna to allow the antenna to be located correctly for various different watches/clocks.
The code has been changed slightly to show the time code segment being transmitted to the watch.
I have used Vero Board rather than a PCB and a WROOM 32 module.
An LED displays the DCF77 pulses and a PIR turns off the display when no one is around.
The watch holders are mounted in a 3D printed base that also houses the OLED display, DCF77 LED and PIR.
The Wave Ceptor logo has been changed to a generic logo.
| AerialArm01.FCStd | 56.3KB | |
| AerialArm01.stl | 11.2KB | |
| AerialArmCover01.FCStd | 32.7KB | |
| AerialArmCover01.stl | 2.2KB | |
| AerialBase01.FCStd | 60.3KB | |
| AerialBase01.stl | 100.1KB | |
| Base.FCStd | 89.5KB | |
| Base.stl | 303.2KB | |
| basewooden.FCStd | 27.8KB | |
| basewooden.stl | 2.0KB | |
| LEDHolder01.FCStd | 28.0KB | |
| LEDHolder01.stl | 35.2KB | |
| OLEDHolder.FCStd | 44.9KB | |
| OLEDHolder.stl | 4.0KB | |
| PIR_Cover.FCStd | 37.2KB | |
| PIR_Cover.stl | 31.1KB | |
| standBase01.FCStd | 51.0KB | |
| standBase01.stl | 399.3KB | |
| StandRear01.FCStd | 204.5KB | |
| StandRear01.stl | 439.9KB | |
| StandRearCover02.FCStd | 107.7KB | |
| StandRearCover02.stl | 505.9KB | |
| WatchStand.stl | 280.8KB |
