Nozzle Torque Wrench better Design
I redesigned a better and more beautiful model.
It is much more efficient to handle, the lid is designed with threaded for a perfect fit and stable so as not to fall
To the bottom you need a 8mmD x 2mm thick neodymium magnet
The turbine propellers are 1.2mm thickness and provide a torque of 1.3-1.4 Nm
UPDATE: 11/02/2021
I have added 10 more models of handles in which you can adapt 2 different diameters D8mm and D5mm for more thicknesses of your choice.
The handles with 8x3-3 and 8x4-3 you can be used neodymium magnet with hole for M3 flat head screw + M3 hex nut
NOTE: D5mm magnets should be glued to prevent them from slipping through the hexagonal hole of the turbine
1.Nozzle Torque Wrench handle D5x1 thick
2.Nozzle Torque Wrench handle D5x1.5 thick
3.Nozzle Torque Wrench handle D5x2 thick
4.Nozzle Torque Wrench handle D5x2.5 thick
5.Nozzle Torque Wrench handle D5x3 thick
6.Nozzle Torque Wrench handle D8x1.5 thick
7.Nozzle Torque Wrench handle D8x2 thick_M3 screw
8.Nozzle Torque Wrench handle D8x2.5 thick
9.Nozzle Torque Wrench handle D8x3-3mm hole screw
10.Nozzle Torque Wrench handle D8x4-3mm hole screw
Link below for 8x3-3 Neodymium Magnet 8mm x 3mm Hole 3mm
For Socket Adapter use the 30mm one. link below
UPDATE: 19/02/2021
Because others said that the maximum torque at the turbine of 1.2mm was not greater than 1Nm I upload another turbine with blades thickness of 1.3mm, so 1.3mm thickness should give a greater torque but i haven't time to check yet
UPDATE: 17/04/2021
i added 1.4mm, 1.5mm, 1.6mm thickness propellers turbine for greatest torque... unknown torque for now ( Not tested yet ! )
Enjoy :)
| Nozzle_Torque_Wrench_1.2_turbine.stl | 1.4MB | |
| Nozzle_Torque_Wrench_1.3_turbine.stl | 1.4MB | |
| Nozzle_Torque_Wrench_1.4_turbine.stl | 1.4MB | |
| Nozzle_Torque_Wrench_1.5_turbine.stl | 1.4MB | |
| Nozzle_Torque_Wrench_1.6_turbine.stl | 1.4MB | |
| Nozzle_Torque_Wrench_handle.stl | 2.0MB | |
| Nozzle_Torque_Wrench_handle_D5x1.5_thick.stl | 2.0MB | |
| Nozzle_Torque_Wrench_handle_D5x1_thick.stl | 2.0MB | |
| Nozzle_Torque_Wrench_handle_D5x2.5_thick.stl | 2.0MB | |
| Nozzle_Torque_Wrench_handle_D5x2_thick.stl | 2.0MB | |
| Nozzle_Torque_Wrench_handle_D5x3_thick.stl | 2.0MB | |
| Nozzle_Torque_Wrench_handle_D8x1.5_thick.stl | 2.0MB | |
| Nozzle_Torque_Wrench_handle_D8x2.5_thick.stl | 2.0MB | |
| Nozzle_Torque_Wrench_handle_D8x2_thick_M3_screw.stl | 2.0MB | |
| Nozzle_Torque_Wrench_handle_D8x3-3mm_hole_screw.stl | 2.0MB | |
| Nozzle_Torque_Wrench_handle_D8x4-3mm_hole_screw.stl | 2.0MB | |
| Nozzle_Torque_Wrench_Lid.stl | 709.4KB |
