Nozzle Organizer 3D Printer Model
The file 'Nozzle Organizer 3D Printer Model' is (stl) file type, size is 643.86 KB.
The file 'Nozzle Organizer 3D Printer Model' is (stl) file type, size is 643.86 KB.
A simple nozzle holder and organizer for the standard lenght nozzles out there, with cover and size plates.
The box is good for 6mm MK8 nozzles,you will need to scale it in the X/Y dimensions to 116% if you want to use it with 7mm MK10 nozzles!
Print:
-1x nozzle base (normal, 9-lines or the S version with 6).
-1x nozzle cap (you can choose the taller lid if you use bigger nozzles)
-8/9/6x nozzle size tags.
The nozzle tags aren't perfectly square, so you have to put them on like in the render (or reverse, if you want to have the size bar facing you).
All the pieces have tollerances that should work with most printers, you can adjust with a little scaling if you have trouble with them (the tags should be a little hardfit, the nozzles a bit loose).
| lines_nozzle_base.stl |
| lines_nozzle_cap.stl |
| lines_nozzle_cap_taller.stl |
| nozzle_base.stl |
| nozzle_base_S.stl |
| nozzle_cap.stl |
| nozzle_cap_S.stl |
| nozzle_cap_taller.stl |
| nozzle_size_01.stl |
| nozzle_size_02.stl |
| nozzle_size_025.stl |
| nozzle_size_03.stl |
| nozzle_size_035.stl |
| nozzle_size_04.stl |
| nozzle_size_05.stl |
| nozzle_size_06.stl |
| nozzle_size_07.stl |
| nozzle_size_08.stl |
| nozzle_size_09.stl |
| nozzle_size_10.stl |
