Nozzle Holder In An Altoids Tin 3D Printer Model
The file 'Nozzle Holder In An Altoids Tin 3D Printer Model' is (stl,gcode) file type, size is 4.6MB.
The file 'Nozzle Holder In An Altoids Tin 3D Printer Model' is (stl,gcode) file type, size is 4.6MB.
** Updated 2019-07-13 to have a smaller height!
I received the E3D "fun pack" nozzles in an Altoid tin, but the nozzles were packed in foam without the label on the top telling me what nozzle was which. I decided to make my own holder to fit inside the tin with labels for what size was which, along with the dot diagram used to identify them. I also added a location for the experimental .15 nozzle I have, along with the .4 nozzle which is commonly used but not included in the fun pack.
| Altoids_Tin_-_Nozzle_Holder.stl | 2.4MB | |
| Altoids_Tin_-_Nozzle_Holder_0.2mm_PLA_MK3S_4h34m.gcode | 17.6MB |
