Novelty Submarine Fishing Lure 3D Printer Model

Author: @
License: CC BY-NC-ND
File formats: STL
Download type: zip
Size:1.2MB

The file 'Novelty Submarine Fishing Lure 3D Printer Model' is (STL) file type, size is 1.2MB.

Summary

"Enemy Fish in the Water ... Release Countermeasures!"

This is recreation of a Novelty Submarine Fishing Lure I came up with about 20 years ago. This is still currently in the testing phase so I'm marking this one as "A work in progress" until I fully test it.

I've included a printed lip but I used a lip cut from a piece of .093 Plexiglass.

I used #10 Treble Hooks and #2 Split Rings on these.

Assembles just like my Crankbait Fishing Lure.


9-17-16 UPDATED - After testing the lure it was a little top heavy with the conning tower so I had to add a void to the bottom of the lure so some weight could be added to the bottom to help it float upright. (I used a trimmed down 4D 1 1/2" Finish Nail as the counter weight.) I still have to reprint it and retest it so it's still a work in progress.

4-6-2020 Updated - Added a updated version that uses figure 8 hook hangers (instead of a through wire) for easier assembly. (Uses #0 stainless steel sinker eyes. You can get a 100 of them for $2 from Lurepartsonline.com


If you have any questions or problems with the files or fitment of the parts just let me know and I will try to fix them.

Enjoy.... and post some makes if you use these it lets me know I'm not wasting my time uploading my designs and if you like what you see check out more of my lures at https://www.theneverendingprojectslist.com/

Sub_Lip.STL 94.8KB
Sub_Lure.STL 778.6KB
Sub_Lure_2020.STL 2.2MB