Notes Paper Slips Holder 3D Printer Model
The file 'Notes Paper Slips Holder 3D Printer Model' is (stl) file type, size is 109.2KB.
The file 'Notes Paper Slips Holder 3D Printer Model' is (stl) file type, size is 109.2KB.
A simple holder for square notes paper slips. An attempt was made to create a shape that would minimize the amount of material required and printing time, and still provide a rigid enough framework for the paper notes.
Will take approximately 5-6 hours to print at fine quality (0.1 mm, 30-50 mm/s) and require 25 grams of filament.
Available with 9 cm or 10 cm internal space (notes will typically have an edge length of 8.7 or 9.7 mm).
Bottom thickness: 1.5 mm
Walls thickness: 2 mm
Height: 5cm
Each version is available with or without the http://My3D.it mark.
If you need a different size or want your own text on it just let me know and I will gladly design it and upload it here at no charge.
Of course small size adjustments can be made in the slicer software by scaling the object, if needed, before printing.
You want one but don't have a 3D printer? No problem! Ask me to print one for you through 3DHubs: https://www.3dhubs.com/rome/hubs/my3d
| porta-foglietti-2-10cm-logo-my3d.stl | 629.2KB | |
| porta-foglietti-2-10cm.stl | 37.3KB | |
| porta-foglietti-2-9cm-logo-my3d.stl | 625.2KB | |
| porta-foglietti-2-9cm.stl | 33.3KB |
