I designed this thing because I couldn't find a decent looking corridor to display my Xenomorph. It's designed for lights along the hallway upper and lower areas as well as behind the door (glass panels part not included). I'm thinking about using 2812 LEDs with a D1 mini to drive the lights in a programable manner with WLED.
Notes on printing:
You will need to print 6 of the "light diffusers" in a transparent material. I don't think you will need supports for anything if you print the items on their sides. I've included 1.8mm holes on the pieces to use standard filament for "alignment pegs".
Update 2023/3/25:
Fixed some minor blemishes, added alignment pins to section behind the door, and made the floor texture more pronounced.
Dimensions: W = 325mm, H = 182mm, D = 170mm
Video of the finished project:
https://www.youtube.com/watch?v=sQWureedmNA
WLED Setup:
Link to WLED presets and config is below. If you wire up the same # of LEDs in the segments I mentioned above you can use my WLED config without modification.
https://drive.google.com/drive/folders/1vi54O25n2HTIFjiaMTZexYkwaULbkVc2
| behind_door_cover.stl | 81.3KB | |
| door_section.stl | 1.5MB | |
| end_bulkhead.stl | 461.6KB | |
| light_diffuser.stl | 74.4KB | |
| middle_section.stl | 1.1MB | |
| pipe_section_no_door.stl | 761.5KB |
