Decided to cosplay as Yato from Noragami and couldn't really find a nice variant of his sword online, so I decided to design my own.
Unfortunately, there are glaring issues with the designs due to my printer's size constraints. (Huge joint seams) It can definitely be lessened with more iterations... But this is good enough in my opinion!
My first time dealing with spraypaints! Am quite happy with how it turned out.
There are two swords! A Katana and a Wakizashi! the STL files have their names marked out to differentiate them. Each sword consists of 4 pieces.
Please feel free to ask any questions!
NOTE: You might have to widen out the holes and sand down the connecting joints depending on your printer.
NOTE 2: You will have to print it in the orientation shown in the image.
Materials used to assemble:
Spraypaint used:
Where I purchased my materials:
Where I purchased my spraypaints:
| R3_ASSEM_katana.iam | 209.0KB | |
| R3_ASSEM_wakizashi.iam | 209.5KB | |
| R3_katana_1.ipt | 332.5KB | |
| R3_katana_1_V1.1.stl | 36.4KB | |
| R3_katana_2.ipt | 378.5KB | |
| R3_katana_2_V1.1.stl | 65.6KB | |
| R3_katana_3.ipt | 413.0KB | |
| R3_katana_3_V1.1.stl | 68.0KB | |
| R3_katana_4.ipt | 374.0KB | |
| R3_katana_4_V1.0.stl | 55.9KB | |
| R3_wakizashi_1.ipt | 336.5KB | |
| R3_wakizashi_1_V1.0.stl | 35.6KB | |
| R3_wakizashi_2.ipt | 382.5KB | |
| R3_wakizashi_2_V1.0.stl | 64.3KB | |
| R3_wakizashi_3.ipt | 405.5KB | |
| R3_wakizashi_3_V1.1.stl | 65.7KB | |
| R3_wakizashi_4.ipt | 373.0KB | |
| R3_wakizashi_4_V1.1.stl | 59.0KB |
