I wanted to run a Noco NLP30 in an Alfa 4C, and I needed to take up some space.
The battery sits in the bottom piece, and the top piece takes up slack for the OEM battery strap.
After printing I filled gaps with rubber sheeting and hot glue. I also installed these posts (link below) that screw into the top of the Noco battery and make the OEM Alfa stuff clamp right on.
Car seems to like it!
Printed on a Crealty Ender 5 Plus.
| Battery_Adapter_Bottom.stl | 5.4KB | |
| Battery_Adapter_Top.stl | 3.4KB |
