The file 'No Slip Power Supply Mount Clip Bracket For Any Width Aluminum Extrusion 20mm Openbuilds V-slot / Misumi 3D Printer Model' is (f3d,stl,stp) file type, size is 133.2KB.
These power supply clips are designed to fit standard 22v 30a power supplies like these:
http://openbuildspartstore.com/12v-30a-power-supply/
Width of bracket interior ~114mm
Height of bracket interior ~60mm
"Bracket with notch" has a small notch on 2 sides that key into a groove on the corner of the power supply. "Bracket no notch" does not have this slot, so it can be adjusted to fit. One bracket with the notch could be enough to mount to single 20x20mm extrusion.
Prints well in PLA, ABS.
2-3 shells ~1mm wall thickness
20%+ fill rate
Hardware needed:
(2-4) 8mm m5 screws
(2-4) t-nuts
File types provided:
STEP
STL
F3D (Autodesk Fusion 360)
Enjoy!
| bracket_no_notch.f3d | 58.1KB | |
| bracket_no_notch.stl | 25.3KB | |
| bracket_no_notch.stp | 31.6KB | |
| bracket_with_notch.f3d | 52.0KB | |
| bracket_with_notch.stl | 30.7KB | |
| bracket_with_notch.stp | 42.3KB |
