I recently bought a 2005 350 base coupe, and among the various bits that are expected to be messed up on an 18-year-old entry-level sports car was the passenger door vent. Removing it revealed that the comb which connects the three vanes was missing. I took out the driver's side vent for reference and made my own. I figure if mine was broken, someone else's likely is too so I should share.
You will need 3 m2 cap head screws to fasten this to the vent body. The original uses 3 little balls that seemed like a weak spot in the design, especially for printing it, so I went with this instead. I may add another file with the original style as well later on.
| 350z_Vent_Comb.stl | 895.8KB |
