Nintendo Switch Top Mounted Card Holder 3D Printer Model
The file 'Nintendo Switch Top Mounted Card Holder 3D Printer Model' is (3mf,stl) file type, size is 103.5KB.
The file 'Nintendo Switch Top Mounted Card Holder 3D Printer Model' is (3mf,stl) file type, size is 103.5KB.
My kids couldn't open the multi card holder case that i got with the Switch so i designed this in OnShape.
Yes there are loads of cool game card holders , but i dislike clutter on my TV stands.
Holds four cards and should be a tight enough fit for the cards to stay inside even when held upside down. Another advantage is that it holds the Switch firmly into the dock, meaning no wobble and therefore no damage to the charging components.
Simply slide the mount onto the switch whilst its in the dock and bobs your uncle!
I have included a 3MF to show how i oriented it, and a STL to do your own.
I am super apologetic if this print does not work out for you. I Used a 100mm calibration print and according to my digital calipers it was on average 1.1 mm out on all axis.
Yet this required negligible adjustment from measurements taken with the same calipers.
Anyhow, onto the details:
Printer: AnyCubic Kobra 2
Slicer: Cura
Resolution: 0.2mm - 0.3mm
Supports: Tree
Adhesion: Not required (i use a skirt to clear nozzle)
Infill: 20% - works fine
Additional Notes:
Yes you could print this upside down, but it may be difficult to clear the cartridge holes of any support material.
| Switch_Top_Mounted_Card_Holder_V1.3mf | 115.5KB | |
| Switch_Top_Mounted_Card_Holder_V1.stl | 18.6KB |
