Nintendo Switch Joy-Con Drift Fix 3D Printer Model
The file 'Nintendo Switch Joy-Con Drift Fix 3D Printer Model' is (stl) file type, size is 1.6KB.
The file 'Nintendo Switch Joy-Con Drift Fix 3D Printer Model' is (stl) file type, size is 1.6KB.
These are 6 different spacers with various thicknesses used to correct the drift issues for the Nintendo Switch Joy-Cons. Please refer to the video below for more details about the drift issue.
https://www.youtube.com/watch?v=Vid8lIXmZwE
Depending on the thickness of the adhesive tape you choose to use, print the spacer thickness that corrects the drift in your Joy-Con. Attach the spacer to the Joy-Con as shown in the video above. If you have to tightly squeeze the Joy-Con together to reassemble it, then the spacer thickness is too great.
| Nintendo_Switch_Joy-Con_Fix_-_0.50mm.stl | 684.0B | |
| Nintendo_Switch_Joy-Con_Fix_-_0.60mm.stl | 684.0B | |
| Nintendo_Switch_Joy-Con_Fix_-_0.70mm.stl | 684.0B | |
| Nintendo_Switch_Joy-Con_Fix_-_0.80mm.stl | 684.0B | |
| Nintendo_Switch_Joy-Con_Fix_-_0.90mm.stl | 684.0B | |
| Nintendo_Switch_Joy-Con_Fix_-_1.0_mm.stl | 684.0B |
