Nintendo Switch Grip (Docked) 3D Printer Model
The file 'Nintendo Switch Grip (Docked) 3D Printer Model' is (stl,ai,svg) file type, size is 4.2MB.
The file 'Nintendo Switch Grip (Docked) 3D Printer Model' is (stl,ai,svg) file type, size is 4.2MB.
Obviously there’s no lack of 3D printable docked grips for the Switch, and whilst I could go on in length about my motivations and goals, suffice to say that I can be quite picky when it comes to ergonomics and that I designed this as a complement to my portable switch grip found here.
Trying to be to the point then, the main thing setting my design apart is mainly that it incorporates the proper metal rails from either the standard grip or the slide-on covers that come with the Switch.
Furthermore, it also incorporates the light pipes from the standard grip to make it all a bit more complete. And on a similar note, the mid-section also has a cut out intended for a laser cut and engraved piece of acrylic in the place of a logo.
Recognising that not everyone has access to a laser cuter or that not everyone might be comfortable disassembling their standard grip to get at the light pipes; I've included alternate versions of the Mid piece. In the case of the logo there're versions that have the Switch logo incorporated into the design.
I do want to stress that I don't quite consider this to be finished, mainly in regards to the light pipes, and if you do decide to print that version then be prepared to put some extra work into it. Other than that the design should print easily enough with the settings listed bellow.
Continue scrolling for more detailed instructions.
| Bracket_A_L.stl | 322.2KB | |
| Bracket_A_R.stl | 322.2KB | |
| Bracket_B_L.stl | 182.2KB | |
| Bracket_B_R.stl | 182.2KB | |
| GC_Logo.ai | 176.9KB | |
| GC_Logo.svg | 1.1KB | |
| Grip_L.stl | 3.1MB | |
| Grip_R.stl | 3.1MB | |
| Mid_A.stl | 540.1KB | |
| Mid_B.stl | 521.8KB | |
| Mid_C.stl | 1.1MB | |
| Mid_D.stl | 1.1MB |
