Ninebot ES2 Oxelo’s Scooter Child Carrier Holder 3D Printer Model
The file 'Ninebot ES2 Oxelo’s Scooter Child Carrier Holder 3D Printer Model' is (stl) file type, size is 889.4KB.
The file 'Ninebot ES2 Oxelo’s Scooter Child Carrier Holder 3D Printer Model' is (stl) file type, size is 889.4KB.
I just desingned this holder, because the glue on the plate was not enough.
Maybe the constuction also fits on the ES1.
There is a difference in the upper parts!
Print 2 tims the lower parts and 4 of the distance holder/ spacer
You will need:
4 countersunk head screws M4x40
4 Lock nuts M4
64g Material
5 hours printing time
The oxelo part, you can buy at decathlon for 10 Euro.
https://www.decathlon.at/scooter-standbrett-fur-kinder-id_8329939.html
Have also a look to:
https://www.thingiverse.com/thing:3343131
and
https://www.thingiverse.com/thing:3395427
these are also for this scooter.
Use it at your own risk!
Enjoy and give a tip to my son!
| distanzhalter.stl | 481.5KB | |
| Oberteil2mmhinten.stl | 1.3MB | |
| Oberteil_vorne.stl | 818.8KB | |
| Unterteil.stl | 1011.7KB |
![[K] Aide Maintien Crayon (Pen Holder) 3D Printer Model](https://res.3axis.co/1cf12f82-2b45-401f-89bb-1db6a049060f/images/5efae9d8-6708-43c1-8d60-4c32f1474846_thumb.jpg)
