Nilight Switch Mounting Bracket – SG Subaru Forester Ashtray Replacement 3D Printer Model
The file 'Nilight Switch Mounting Bracket – SG Subaru Forester Ashtray Replacement 3D Printer Model' is (stl) file type, size is 739.7KB.
The file 'Nilight Switch Mounting Bracket – SG Subaru Forester Ashtray Replacement 3D Printer Model' is (stl) file type, size is 739.7KB.
This bracket is designed to work on a 2003-2008 SG Subaru Forester. As shown in the picture, it allows one to mount the Nilight switch bracket (linked below) in place of the ashtray compartment. It can only can fit the 5 switch design that Nilight sells; linked is the 4 switch with the 5th spot containing USB ports: https://www.amazon.com/dp/B0BF9T5T7Q
The two parts were printed separately on a Bambu Labs A1 Mini in PETG (see printing notes).
See the CAD here: https://cad.onshape.com/documents/7e6b3c27756973fdf3cee8ba/w/2f79282b3a4250ade50b88db/e/56397ebc87136586a807e5d4?renderMode=0&uiState=670380c30e2a684a47a5521a
Note: I know that the CAD was not made in the best way for ease of use. I made the two halves to mate with one another, and each relies on dimensions from the other. A better way to have made it would have been to design the two in separate part files and use an assembly to join the two.
P.S. the switches they provide are for controlling relays, not for controlling anything directly. You will have to buy a relay box, mount it somewhere, and wire the switches to the relays and the relays to your accessories.
Disclaimer: This mount was only tested on a 2003 Subaru Forester XS Premium. In theory, it should work with all SG Foresters, but it has not been verified.
| nilight-switch-mounting-bracket_switch-side.stl | 179.6KB | |
| nilight-switch-mounting-bracket_trim-side.stl | 1.8MB |
