The plug for connecting the micnova GPS is sometimes in the way and may slip off from the camera (Nikon D7100 in my case). I have therefore created a small tool to protect the plug as shown on the images.
I hope this may help others that face a similar problem.
Have fun!
I have printed it on PLA+ with an infill of 20%. Seems to be stable enough.
You may also want to print a screw to hold my thing. I have used CameraScrewL10H13T5.4.stl from thingiverse.
nikon_micnova_holder.stl | 478.8KB |