Film holder for a Nikon Coolscan 8000 or 9000. This is designed to hold three 6x6 frames. This is a modification of my 6x7 holder with measurement from someone else.
The stock 120 film holder bows out around the end of the 2nd cut frame since it has nothing to help capture it.
This design uses a second piece (once magnets are glued to them) sticks to the top of the film and holds everything flat.
Besides magnets (I recommend 5mm x 2mm neodymium) the two faces that touch the film should be sanded flat and have adhesive backed flocking tape/paper added to prevent scratching the film.
I have a post on my site that I have more details on: https://houstinwehaveaproblem.com/uncategorized/nikon-coolscan-8000-9000-6x7-film-holder/
This is the full length version that matches the existing film holder lengths. If your printer isn’t big enough to print the whole thing, it can be cut off at the back of the teeth without any downsides.
| 6x6-FilmCoverPlate.stl | 293.6KB | |
| 6x6-FilmHolder.stl | 536.6KB | |
| Nikon_6x6_FH.step | 696.5KB |
