Netgear GS305v3 Rack Mount 3D Printer Model
The file 'Netgear GS305v3 Rack Mount 3D Printer Model' is (stl,FCStd) file type, size is 715.8KB.
The file 'Netgear GS305v3 Rack Mount 3D Printer Model' is (stl,FCStd) file type, size is 715.8KB.
Theres the STL and the Ondsel file, i printed it at 100% and it worked ok, Only change i made after print was add a 1mm fillet on the recepticle to make it stronger but its manly aesthetic.
Use a Brim, the side where there is no holes tends to warp with PLA, i waited for the print to finish and held down the edges while it was cooling off, fixed 99% of the warping
There is 2 pairs, one is for mounting on the right side of the U unit and one for the left, the Right-Side in the name signifies where the switch would be so the "Right-Side" variant mounts on the LEFT and the regular one on the RIGHT
| Netgear-GS305v3-Rack-Mount.stl | 459.7KB | |
| NetgearGS305v3-ServerMount-Right-Side-Body.stl | 63.8KB | |
| NetgearGS305v3-ServerMount-Right-Side.FCStd | 309.9KB | |
| NetgearGS305v3-ServerMount.FCStd | 323.7KB |
