This is a 15 piece nesting box set. Some of the boxes may print a bit tight so you can file down the sides to make them smoother and they should fit together fine. Piece 11 comes in two parts, a top and a bottom. The boxes range in size from the largest being 45mmX77mmX60mm to the smallest piece being 7mmX11mmX4mm. Printing with a 30% infill is optimal.
| All.stl | 21.2KB | |
| Pieces_11_AB.stl | 2.8KB | |
| Piece_1.stl | 684.0B | |
| Piece_10.stl | 1.4KB | |
| Piece_12.stl | 1.4KB | |
| Piece_13.stl | 1.4KB | |
| Piece_14.stl | 1.4KB | |
| Piece_15.stl | 1.4KB | |
| Piece_2.stl | 1.4KB | |
| Piece_3.stl | 1.4KB | |
| Piece_4.stl | 1.4KB | |
| Piece_5.stl | 1.4KB | |
| Piece_6.stl | 1.4KB | |
| Piece_7.stl | 1.4KB | |
| Piece_8.stl | 1.4KB | |
| Piece_9.stl | 1.4KB |
