Nerf Retalicon Super Pump Kit 3D Printer Model
The file 'Nerf Retalicon Super Pump Kit 3D Printer Model' is (stl) file type, size is 208.8KB.
The file 'Nerf Retalicon Super Pump Kit 3D Printer Model' is (stl) file type, size is 208.8KB.
Super pump kit for Nerf Retaliator and Recon
Should work with all other side prime or bolt blasters such as the tri strike
Hardware Required
200mm x 20mm PVC pipe (27mm OD). x2
3mm Self Tapping screws x2
M4x6 Bolt x2
M4 Nut x2
Any aluminium bar ~12x3mm x 180mm or 1/2"x1/8" x 7.5"
Glue
Instructions
Step 1. Insert the m4 nuts into the hole in the bolt carrier by heating them up with soldering iron and using them as heat set insert.
Step 2. Drill 4mm holes in the aluminium bars that are 163mm apart
Step 3. Use ur brain and figure out the rest.
I use the shade grip and stealth sights
| 11long_picatinny.stl | 27.6KB | |
| 22_pvc_adapter.stl | 232.4KB | |
| 33pvc_joiner.stl | 173.9KB | |
| 55_pvc_gripper.stl | 217.7KB |
![Shogi [GgameCard Kit] 3D Printer Model](https://cdn.3axis.co/assets/e1/1a/8c/99/e11a8c99-e47c-458e-bb70-d7d967db8abd/images/9b4f48c1-a1c2-4cab-9e42-06030da454ab_thumb.jpg)
