Nerf Retaliator – Pump Action With Picatinny Rail 3D Printer Model
The file 'Nerf Retaliator – Pump Action With Picatinny Rail 3D Printer Model' is (STL) file type, size is 686.3KB.
The file 'Nerf Retaliator – Pump Action With Picatinny Rail 3D Printer Model' is (STL) file type, size is 686.3KB.
My goal was to design a very streamlined Pump action for the Nerf Retaliator.
Compatible with Picatinny Foregrips.
The connection between the Pumpgrip and the Slide is made out of Ø 2mm TIG welding filler rod. For dimensions check the Photo.
If the press fit of the Ø 2mm rod in the printed part is not enough than you can secure the it with short M3 screws.
You have to mod the Slide according to the pictures.
Everything has to fit precisely or it won't work.
So far i only tested this with the Stock Spring.
If you want to use this Mod then i highly recommend that you also print this:
https://www.thingiverse.com/thing:1628290
| v1.0.STL | 687.3KB | |
| v1.0_with_support.STL | 1.2MB |
![Timon [Lion King] 3D Printer Model](https://res.3axis.co/d5198e72-7677-4efb-b76b-4147651e7fcd/images/b60df999-b01c-4211-8da1-3c6facfdd42e_thumb.jpg)
