Stabilize your Nerf jolt with this super simple 2 part print. In between the two pieces you will need to glue a 13 inch rod with a diameter of 16 mm. It can be a wooden or plastic rod. I wasn't able to find any rods with a diameter of 16 mm online, but I was able to find one with a diameter of 19 mm. This one would work if you shaved down the ends to 16 mm.
Video: https://www.youtube.com/watch?v=KRLjjmkekFE
19mm rod: http://tinyurl.com/nsu75qq
| nerf_jolt_stock_parts.stl | 555.4KB |
