Designed in conjunction with my good friend Rainbow Alex of Rainbow Mods and Props (https://rainbowmods.com/) here is my take on some real functional nice to have mods for the Gecko blaster by Ehdrien (original source files here: https://github.com/Ehdrien )
Features:
BONUS Features
This has been tested and refined over almost two years and has proved to be easily printable, quite robust, and although it looks totally weird, the side angled grip for priming is oddly comfortable. (I know! ...but just try it.)
THIS MOD REQUIRES M2 & M3 BRASS HEATSET INSERTS WITH MATING HARDWARE
For a rundown of the features check out this vid: https://www.youtube.com/watch?v=_iTEnj1XCqA&ab_channel=RainbowCreations
Works well with my printable Angled Talon Magazine https://www.thingiverse.com/thing:6811394
Also depicted above is my printable 9 bearing BCAR: https://www.thingiverse.com/thing:5887612
| catch_housing_front_RMP_C.stl | 463.7KB | |
| catch_housing_rear_RMP.stl | 201.3KB | |
| GGS_AFG_HANDLE_45_LEFT_2_section_2_D.stl | 8.7MB | |
| GGS_AFG_HANDLE_45_LEFT_2__section_1_D.stl | 7.3MB | |
| GGS_PRIMING_HANDLE_C.stl | 1.5MB | |
| GGS_PRIMING_HANDLE_GRIP_PLATE_2_B.stl | 179.4KB | |
| GGS_PRIMING_HANDLE_GRIP_PLATE_3_B.stl | 259.9KB | |
| GGS_PRIMING_HANDLE_GRIP_PLATE_5_T-PULL_H.stl | 5.1MB | |
| GGS_PRIMING_HANDLE_RAIL_PLATE_1_B.stl | 538.3KB | |
| GGS_PRIMING_HANDLE_RAIL_PLATE_2_D.stl | 262.3KB | |
| GGS_SLIDE_V4.stl | 518.5KB | |
| GGS_TOP_PLATE_SIGHT_C.stl | 966.7KB | |
| GGS_TRIGGER_SPRING_COVER.stl | 577.7KB | |
| GGS_VFG_BRACKET_-_RAIL_GRIP_M2_L.stl | 42.6KB | |
| GGS_VFG_BRACKET_M2_L.stl | 733.4KB | |
| GGS_VFG_GRIP_SCALE_2_BLANK_B.stl | 539.8KB | |
| GGS_VFG_GRIP_SCALE_KRYPTEC_2_C.stl | 1.7MB | |
| GGS_VFG_HANDLE_2_section_1_F.stl | 6.5MB | |
| GGS_VFG_HANDLE_2_section_2_F.stl | 6.4MB | |
| GGS_VFG_RAIL_CLAMP_2_C.stl | 99.8KB |
