Barrel extension for Elite 2.0 Commander. Might fit other models also, I designed and tested it on the mentioned model only.
File name meaning:
long = 15cm (5.9")
short = 10cm (3.9")
30 = holes offeset by 30º
22.5 = holes offeset by 22.5º
0 = holes are in straight line
full = front of the extension is full
open = front of the extension is open
| barrel_long_0_full.stl | 2.4MB | |
| barrel_long_0_open.stl | 2.4MB | |
| barrel_long_22.5_full.stl | 2.4MB | |
| barrel_long_22.5_open.stl | 2.4MB | |
| barrel_long_30_full.stl | 2.4MB | |
| barrel_long_30_open.stl | 2.4MB | |
| barrel_short_0_full.stl | 1.6MB | |
| barrel_short_0_open.stl | 1.6MB | |
| barrel_short_22.5_full.stl | 1.5MB | |
| barrel_short_22.5_open.stl | 1.6MB | |
| barrel_short_30_full.stl | 1.5MB | |
| barrel_short_30_open.stl | 1.6MB |
