Nerf Barrel To 1/2 Inch Pvc Pipe Adapter 3D Printer Model
The file 'Nerf Barrel To 1/2 Inch Pvc Pipe Adapter 3D Printer Model' is (stl) file type, size is 2.6MB.
The file 'Nerf Barrel To 1/2 Inch Pvc Pipe Adapter 3D Printer Model' is (stl) file type, size is 2.6MB.
Note: I have made a new adapter that will fit 1/2 inch PVC on the inside and 1.5 inch PVC on the outside: https://www.thingiverse.com/thing:2770714
This nerf barrel adapter with a hole to fit a length of 1/2 inch PVC pipe. Can be used to make the A-280CFE from Star Wars Rogue One. Print it with the largest flat side down, the lugs should be at the top. There are two files, one with meshmixer supports for the lugs and one without. The file with the supports is in the correct orientation for printing but the other file should be flipped upside down.
| NerfHalfInchPVCMk2.stl | 3.7MB | |
| NerfHalfInchPVCMk2_MMsupports.stl | 3.8MB |
