Nerd Coins/Fridge Magnets 3D Printer Model
The file 'Nerd Coins/Fridge Magnets 3D Printer Model' is (stl) file type, size is 1.9MB.
The file 'Nerd Coins/Fridge Magnets 3D Printer Model' is (stl) file type, size is 1.9MB.
Your Pause-at-Height game has to be strong for many of these. Print multiple color for the coin and then print the coin sleeve the same color as the last layer of the coin. Drop some glue and a magnet in the recess in the sleeve and then drop the coin in. I also use glue on the back of the coin when putting it into the sleeve, but the fit is tight enough that it may not be necessary. Coins are 40mm x 4mm.
These are the magnets I use. https://www.amazon.com/gp/product/B075WV5HPH/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1. Strong enough to get through the bottom layer and stick to your fridge, but not so strong that you can't carry one around in your pocket without sticking to everything else.
More to come!!
| Batman_Coin.stl | 207.9KB | |
| C3PO_Coin.stl | 980.2KB | |
| Cap_Coin.stl | 264.6KB | |
| Daredevil_Coin.stl | 295.1KB | |
| DC_Coin.stl | 73.4KB | |
| Deadpool_Coin.stl | 312.8KB | |
| Fantastic_Four_Coin.stl | 236.2KB | |
| Final_Coin_Sleeve.stl | 270.8KB | |
| Flash_Coin.stl | 191.3KB | |
| Flash_Coin_Lightning.stl | 39.5KB | |
| Green_Lantern_Coin.stl | 560.0KB | |
| Hawkeye_Coin.stl | 210.0KB | |
| Hulk_Coin.stl | 353.7KB | |
| Iron_Man_Coin.stl | 619.2KB | |
| Justice_League_Coin.stl | 539.5KB | |
| Mandolorian_Coin.stl | 352.9KB | |
| Peacemaker_Coin.stl | 240.9KB | |
| Robin_Coin.stl | 238.3KB | |
| Shazam_Coin.stl | 242.2KB | |
| Star_Wars_Coin.stl | 279.9KB | |
| Stormtrooper_Coin.stl | 405.5KB | |
| superman_coin.stl | 289.3KB | |
| Wonder_Woman_Coin.stl | 314.9KB | |
| X_Men_Coin.stl | 241.4KB |
![Tusken Raider Mask Greeblies [HIGH] 3D Printer Model](https://res.3axis.co/4b563c18-216e-4a3b-becd-e7f1d0860f4d/images/2cf52c08-e99f-47cf-ae81-364904701d17_thumb.jpg)
