Neptune 4 Pro Silent Fan 3D Printer Model
The file 'Neptune 4 Pro Silent Fan 3D Printer Model' is (STL) file type, size is 385.7KB.
The file 'Neptune 4 Pro Silent Fan 3D Printer Model' is (STL) file type, size is 385.7KB.
Need to purchase 2x 60mm fans (+ fan screws) with mount holes at 50mm pitch, M3x6 self tapping brass thread inserts & M3x5 countersink screws.
Need to remove the OEM switch assy.
Only require 30% fans to equal 100% with the OEM 4 smaller fans.
UPDATE: Found with high bed temps (Esp. ABS), >85C the nozzles & bottom of main body can distort (Mines quite close at beginning). Strengthened bottom of main body, added supports for nozzles + increased flow rate (larger nozzlle gap). Added protection of a 1.5mm thick nylon plate superglued to main body bottom (under testing now).
| Electrical_Cover.STL | 15.1KB | |
| Silent_Fan_Front_Panel.STL | 511.5KB | |
| Silent_Fan_Module_2x60mm_Fans.STL | 499.4KB | |
| Silent_Fan_Module_2x60mm_Grille.STL | 500.5KB | |
| Silent_Fan_Nylon_Heat_Shield.STL | 684.0B |
