Led Housing for a 24 Ring of NeoPixel Leds.
Designed as a sleek way to integrate NeoPixel rings into projects.
Instructions:
- Print from PLA or PETG
- Print Body.stl in any color (~250 micron Layer Height)
- Print Diffuser.stl in clear (~100 micron Layer Height)
- Thread the leads through the hole
- Insert NeoPixel ring - Take care to place the leads around the standoffs. The body is designed to friction fit against the outside of the LED ring.
- (Optional) Add a drop of CA glue to secure the ring
- Cap with Diffuser, round side on the inside (So the smooth bed-facing side is out)
- Secure Diffuser with CA glue
- (Optional) Seal diffuser and wire hole completely for moisture-resistant housing.
Parts:
- Body.stl - Flat-mount option, wires feed out the side
- Body_RearMount.stl - Designed as a panel-mount alternative, wires feed out the back
- Diffuser.stl - Front lens element
- Body Mounting Holes.pdf - Mounting hole dimensions for Body_RearMount.stl
- [Part].step - CAD model for reworking
