Neo-Classic APC 3D Printer Model
The file 'Neo-Classic APC 3D Printer Model' is (zip,stl) file type, size is 5.1MB.
The file 'Neo-Classic APC 3D Printer Model' is (zip,stl) file type, size is 5.1MB.
Introducing my imagining of the ubiquitous imperial armored troop transport. Classic styling coupled with a more modern footprint and level of detail.
This is my first attempt at a 3D model. It was designed entirely from scratch, recreating a custom physical model I made years ago. I worked hard to optimize it for printing. Most flat surfaces are oriented at the top for best finish, are unobstructed for easy sanding, or are hidden.
Parts are designed to have a tight fit so some minor finishing may be required. I needed to true up the top round of the exhaust sockets with a knife for the nozzles to seat properly.
Print 2 each of: Side, Track, Wheels.
The Options folder has some alternate parts and individual files for parts that were grouped.
| ALL_FILES_Neo-Classic_APC.zip | 2.5MB | |
| Neo_APC_Bits.stl | 910.4KB | |
| Neo_APC_BodyTop.stl | 835.8KB | |
| Neo_APC_Bottom.stl | 33.3KB | |
| Neo_APC_Front.stl | 86.5KB | |
| Neo_APC_Full_Assembled.stl | 2.6MB | |
| Neo_APC_HatchRing23.stl | 364.8KB | |
| Neo_APC_Rear.stl | 137.8KB | |
| Neo_APC_Side.stl | 147.5KB | |
| Neo_APC_Track.stl | 41.1KB | |
| Neo_APC_Wheels.stl | 947.3KB | |
| Options.zip | 756.0KB |
