A new attempt at a low profile quadcopter frame capable of running 5" props. The M3 bolt holes are intentionally made a bit small so that I can drill them out precisely with a 3mm bit or thread them with a tap.
Update: avoid the FMU dampening; just mount the controller straight to the frame with nylon screws or double sided tape. It flies much MUCH better this way.
| neo180_fmu_holder_v1.stl | 137.4KB | |
| neo180_lowest_v2.stl | 188.8KB | |
| neo180_top_v2.stl | 171.6KB | |
| neo230_v2.stl | 423.7KB |
