This is a full set for all the Tokens used in the Nemesis Board game:
The tokens which are exclusive to the expansions take up only 2 of the 4 little trays, most of the construct is basically for the basic game (since the expansions only add up some tokens and mostly use the tokens from the base game).
IMPORTANT: The drawers need to be a bit wider, otherwise they easily fall of the rails. In order to change that, apply 1mm to each side on the railings.
The main box was designed to be printed facing upwards to avoid any supports. The only supports needed would be the ones due to the curvature to certain parts of the trays, but are minimal in relation to the printing volume.
Even the bag (used for the intruder / void seeders tokens) could fit on top of the last tray and is even encouraged to hold the tokens in place and avoid them to pop out when being transported.
This was made for a friend who sometimes brings the game in a bag on a bike, which made the whole design one that could withstand some "shaking". After some testing I can say, 99% of the tokens stay in place and none of the plastic ones move.
The folding door is a nice touch, but needs a bit of work after printing: Bend all the articulations each one at a time so it gets folded really easily. Otherwise it will not bend properly into the guides and the little pieces that fit into them will break. After a bit of opening and closing, the door runs smoothly enough to be opened easily but not by accident on itself; this is made on purpose.
Note: to open/close the door properly place both hands on each side of the box and slide the door up/down with your thumbs placing them on the curvature. If you apply the force on the curvature, the rest will slide with ease.
The doors shown in the picture have a custom base which you can find here:
https://www.thingiverse.com/thing:4275607
Enjoy!
| Nemesis_Token_Storage_Box.stl | 7.9MB | |
| Nemesis_Token_Storage_Engine_+_Escape_Pods.stl | 733.5KB | |
| Nemesis_Token_Storage_Folding_Door.stl | 4.6MB | |
| Nemesis_Token_Storage_Plastic_Tokens.stl | 2.6MB | |
| Nemesis_Token_Storage_Tokens.stl | 108.0KB | |
| Nemesis_Token_Storage_Tokens_Aftermath.stl | 44.8KB | |
| Nemesis_Token_Storage_Tokens_Basic.stl | 277.1KB | |
| Nemesis_Token_Storage_Tokens_Intruders_Basic.stl | 302.3KB | |
| Nemesis_Token_Storage_Tokens_Void_Seeders.stl | 174.0KB |
